EPSON Stylus Photo R320
External View
Paper, Block
Dowel
Dowel
Shaft, LD Roller
Clutch
LD Roller
Extension Spring, 0.143
Spur Gear, 36.8
Figure 2-26. Removing "Holder, Shaft Assy." (2)
DISASSEMBLY AND ASSEMBLY
Dowel
Dowel
Holder, Shaft, LD Roller
PE Sensor Board
Hook
Torsion Spring, 0.22
Lever Sensor, PE
Disassembly
Removing "LD Roller"
1.
Release the dowels (x2) which secure "Paper, Block". Then, remove "Paper,
Block".
2.
Release the dowels (x2) which secure "Shaft, LD Roller". Then, remove
"Shaft, LD Roller" and "Clutch" together from "Holder, Shaft, LD Roller".
3.
Remove "LD Roller" from "Shaft, LD Roller".
C A U T I O N
Do not touch "LD Roller" with bare hands.
Reinstalling "LD Roller"
Make sure to match the direction (
"Shaft, LD Roller" with the direction (
on the back side of "LD Roller".
Figure 2-27. Reinstalling "LD Roller"
Revision B
Mark) indicated on
Mark) indicated
mark on "LD Roller"
mark on "Shaft, LD Roller"
54