Removing Panel Board - Epson Stylus Photo R320 Service Manual

EPSON Stylus Photo R320

2.3.6 Removing Panel Board

External View
Board Assy., Panel
2
C.B.P 3x8
(5-7kgf•cm)
3
Panel Board LCD Panel
Rib and
Adjusting Hole
C.B.S 3x6 (4-6kgf•cm) Shield Plate, LCD
Figure 2-14. Removing "Panel Board"
DISASSEMBLY AND ASSEMBLY
4
1
Line Mark
Cover, LCD
Two-sided
Tapes
Switch
Parts/Units which should be removed before removing "Panel Board"
Paper Support Assy./Preview Monitor Unit/Housing, Upper
Procedure for Removing
1. Remove the screws (x4) which secure "Board Assy., Panel". Then, remove
"Board Assy., Panel".
2. Remove the screw which secures "Panel Board". Then, remove "Panel Board"
from "Shield Plate, LCD".
3. Take off the two-sided tapes (x2) which secure "Cover, LCD" from the back
of "Housing, Upper". Then, remove "Cover, LCD".
C A U T I O N
Do not damage "LCD Panel".
When removing "Panel Board Unit", the switch may detach and
drop. If this occurs, reinstall it referring the figure.
When looking at back side of "Housing, Upper", make sure that
the line mark of "Housing, Upper" securely comes to the position
shown in the figure.
Match the rib of "Shield Plate, LCD" and the positioning hole of
"Panel Board".
Screw "Board Assy., Panel" in the order as shown in the figure.
Disassembly
Revision B
45