EPSON Papers When printing from your computer using the Epson driver, you can choose from any of the following Epson papers. When printing without a computer, select one of the papers marked with an asterisk (*) See page 3 for information Preview monitor about paper settings.
77 °F (25 °C). 220−240 V Model 198 to 264 V Caution: Epson recommends the use of original Epson ink cartridges 50 to 60 Hz only. Products not manufactured by Epson may cause damage to your printer and will not be covered by Epson’s warranties.
Epson ColorLife Photo Paper Epson Glossy Photo Greeting Cards Epson Iron-On Transfer Paper Media Loading Guidelines See page 1 for a list of Epson papers that can be used with this printer. Load paper short edge first, even when printing landscape- oriented pictures.
Follow these steps to load CDs and DVDs in your printer. Caution: If you don’t insert the CD/DVD tray correctly, you may damage the printer or tray. 1. Lift the printer lid and push in the output tray extension. envelopes 2. Lower the CD/DVD tray guide.
Printing Without a Computer Your Epson Stylus Photo R320 printer can print photos stored: On a memory card In a digital camera On a USB data storage device, such as a CD-R drive, thumb drive, or an Iomega ® ®...
Choosing Basic or Advanced Mode You can select Basic mode to quickly create 4 × 6-inch photo prints using Epson Premium Glossy Photo Paper. Advanced mode lets you print with any paper type and size that is available for the printer, and lets you change quality settings and make other adjustments to your photos.
Page 7
Note: If you don’t see the entire image in your prints, check to make sure the Fit to Frame and Crop options are Off. See Printer Basics for more information. for printing, you can print multiple sheets of your selected layout.
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other products may cause damage to your printer not covered by Epson’s warranty.
Be sure you have a new ink cartridge before you begin. Once you start the ink cartridge replacement procedure, you must complete all the steps in one session. 1. Make sure the printer is turned on and not printing, then open the printer cover. 2. Do one of the following: If the red b error light is on (cartridge is empty), press the b maintenance button.
(not over a network); see your on- screen Reference Guide for details. Note: For the best results, load letter-size Epson Photo Quality Ink Head Cleaning Jet Paper in the printer whenever you check the print head alignment.
Caution: To avoid damage, always leave the ink cartridges installed when transporting the printer. Follow these steps: 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer.