Synology DiskStation User Manual page 96

Set up Computer to Access Print Server
After the print server is set up on your DiskStation, Windows, Mac, and Linux client over the local area network
can connect to the print server and access its print/fax/scan service.
To set up print server access with Windows:
1 Install and open Synology Assistant on your computer.
2 Click the Printer Device
cannot see the Printer Device
corner.
Note:
 Using Synology Assistant to set up print server access under the
DiskStations running on DSM v2.0.1-3.0368 and onward.
 Using Synology Assistant to set up print server access under the
DiskStations running on DSM v3.1-1553 and onward.
 For other methods of setting up print server access, open DSM Help, go to
External Devices, click the
Access Printer from Windows section.
To set up print server access with Mac OS X:
1 Make sure DSM's Bonjour Printer Broadcast function is enabled. See "Manage Mac File Service" on Page 52
for more information.
2 For ways of setting up printer server access with Mac OS X, go to
Devices, click the Help
Printer from Mac section.
After the print server access is set up, clients over the local area network can access the printing/faxing/scanning
service provided by the print server.
Access Print Server with iOS Devices
If you have enabled DSM's AirPrint support by following the instructions of the "Set up Print Server on
DiskStation" section, any iOS devices running on iOS 4.2 or later can print to the printer connected to your
1
DiskStation.
To access the print server with an iOS device:
1 Use your iOS device to browse to the document, web page, mail message, or photo you want to print.
2 Tap the action button, and then tap Print.
3 Select the printer named [Printer_Name (DiskStation_Name)], and then tap Print.
---------
1
For recommended peripheral models, including hard drive, USB printer, DMA, and UPS, please visit www.synology.com.
96 Chapter 10: Host Websites, Email Server, and Print Server
tab, click the Add button, and follow the wizard to complete the setup process. If you
tab, enable it by clicking the
Help button (with a question mark) at the top-right corner, and then refer to the
button (with a question mark) at the top-right corner, and then refer to the Access
Synology DiskStation User's Guide
Settings button (with a gear icon) at the top-right
Network Printer mode is only available for
Network MFP mode is only available for
Main Menu > Control Panel
Main Menu > Control Panel
Based on DSM 4.1
>
> External