Synology DiskStation User Manual page 149

Use PTZ Control
If your camera has PTZ (pan/tilt/zoom) support, you can select a camera and use the
the camera's direction. Clicking on the home button will restore the camera back to its original position. If you
have selected a camera with partial PTZ support, the unsupported functions on the
grayed out.
Use Other Functions
On the Live View page, you can also use the following functions.
3 4 5
6
9
7 8
10
11
12
1 To digitally zoom in and out, drag the zoom bar or place the mouse over the live view of a selected camera
and then scroll the mouse. You can also zoom digitally by using the scroll button on your mouse, and move by
dragging the picture.
2 To adjust volume, drag the volume bar.
3 To pause or resume the playback, click this button.
4 To save the current image, click Snapshot.
5 To start manual recording, click
6 To configure layout setting, click Configure.
7 Click Show information, and the status for each camera will be displayed on the corner of each live view
window.
8 To see the corresponding E-Map, click E-Map.
9 To see the live view in full screen mode, click
10 Click Toggle to enable Liveview Analytics on the cameras you want for live viewing.
Note: Only cameras whose Liveview Analytics settings have been configured at
Liveview Analytics
Analytics settings, click the figure icon at the top-right corner and then click Help.
11 To playback and see the frequency of Liveview Analytics events, click
12 To see the corresponding preset or patrol, click the
Note: Non-Internet Explorer browsers support limited functions only.
149 Chapter 16: Safeguard Your Environment with Surveillance Station
1
2
Manual Recording.
Full
under the Management tab can be enabled here. For detailed instructions on Liveview
Synology DiskStation User's Guide
screen.
Camera List
Analytics
Preset Position or Patrol
Based on DSM 4.1
Controller panel to adjust
Controller panel will be
> Advanced >
History.
list.