IBM Remote Supervisor Adapter User Manual page 74

Complete the following steps to remotely access Remote Supervisor Adapters or
ASM processors on the ASM interconnect network:
1. If you have not already done so, start a Telnet session or establish a direct
2. Log in to the Remote Supervisor Adapter. For more information, see "Accessing
3. In the Advanced System Management window, select Remote ASM Access.
4. Select a processor or adapter. The Remote ASM Login window opens.
5. Enter your user name and password.
6. The Advanced System Management window opens, giving you access to the
68
Remote Supervisor Adapter: User's Guide
serial connection.
the text-based interface through a Telnet connection" on page 65.
The Remote ASM Access window opens, listing other system-management
adapters and processors linked to the host server.
Server 1
Server 2
Server 3
Note: It might take up to 45 seconds for newly attached servers to be reflected
in the table of available remote systems. It might take up to 2 minutes for
systems to be removed from the table when detached from the ASM
interconnect network.
remote system-management adapter or processor.
Note: Some options are not available for all servers.