Managing pcie adapters for ibm power system l922 9008-22l; ibm power system s922 9009-22a; ibm power system h922 9223-22h; ibm power system s914 9009-41a; ibm power system s924 9009-42a; ibm power system h924 9223-42h; ibm emx0 pcie gen3 i/o expansion dra (226 pages)
Page 1
IBM Flex System EN4132 2- port 10Gb Ethernet Adapter User’s Guide...
Page 2
IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Page 3
IBM Flex System EN4132 2- port 10Gb Ethernet Adapter User’s Guide...
Page 4
Note: Before using this information and the product it supports, read the general information in Appendix B, “Notices” on page 23, the Safety In- formation and Environmental Notices and User's Guide documents on the IBM Notices for Network Devices CD, and the Warranty Information document that comes with the product.
Finding the MAC and serial number on the adapter ........4 Chapter 2. Installing the IBM Flex System adapter......5 Installing device drivers and verification.
Page 6
IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Chapter 1. IBM Flex System EN4132 2-port 10Gb Ethernet adapter The IBM Flex System EN4132 2-port 10Gb Ethernet adapter provides the highest performing and most flexible interconnect solution for servers used in Enterprise Data Centers, High-Performance Computing, and Embedded environments.
IBM Flex System Notices for Network Devices CD that comes with the adapter contains the following documentation in portable document format (PDF): • IBM Flex System Network Devices Basic Troubleshooting Information This multilingual document contains basic troubleshooting information and a replace- ment parts list for the switches, adapters, and pass-thru modules.
Features and specifications The IBM Flex System EN4132 2-port 10Gb Ethernet adapter has the following fea- tures and specifications: • PCI Express 3.0 (1.1 and 2.0 compatible) through an x8 edge connector up to 8GT/s • 10 Gb/s Ethernet •...
Each adapter has a label on the print side that shows the adapter serial number and the MAC for the Ethernet protocol. Figure 1: Board Label 1 Figure 2: Board Label 2 IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Chapter 2. Installing the IBM Flex System adapter This chapter provides information and instructions for installing the adapter. See the documentation that came with the IBM Flex System compute node for the instructions needed to install the adapter in the node; then, return to this User's Guide for the information and instructions needed to complete the installation.
Page 16
Figure 6: Plug the Adapter Close the retaining clips. Figure 7: Retaining Clips Replace the compute node cover. Installing the IBM Flex System adapter...
To get the version of the running Mellanox OFED/BXOFED, run the following command: > # ofed_info |head -1 MLNX_OFED_LINUX-1.5.3-2.1.0 (OFED-1.5.3-2.1.0) Load the Ethernet Driver By default, the Mellanox OFED stack loads mlx4_en. Run ‘lsmod’ to verify that the module is listed. IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Page 18
TX bytes:399581 (390.2 KiB) run: ethtool <interface> > Host# ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 1000baseT/Full 10000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 1000baseT/Full 10000baseT/Full Advertised auto-negotiation: N Speed: 1000Mb/s Installing the IBM Flex System adapter...
Page 19
Right click and select Properties to display the adapter properties window Click the Details tab and select Device Instance ld (Windows 2003) or Hard- ware Ids (Windows 2008/R2) from the Property pull-down menu IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Page 20
Technologies PCI Device ID. Verify MLX driver Start the “Device Manager” (open a command line window and enter: devmgmt.msc) Open “Network Adapters” Right click the relevant adapter and select Properties Click the Driver tab (example) Installing the IBM Flex System adapter...
Page 21
Display the Device Manager Right-click the relevant adapter and left-click Properties Select the Information tab from the Properties sheet (example) IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Page 22
Obtain the Ethernet address Display the “Device Manager” Right-click the relevant adapter and left-click Properties Select the Details tab from the Properties sheet Select Address from the Property pull-down menu (example) Installing the IBM Flex System adapter...
This includes reliable connected service, datagram service, RDMA and send/receive semantics, atomic operations, user level multicast, user level I/O access, kernel bypass, and zero copy. This capability is enabled when using the Mellanox OFED or WinOF VPI drivers. IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Page 24
ConnectX®-3 EN with RoCE based network management is the same as that for any Ethernet and DCB-based network management, eliminating the need for IT managers to learn new technologies. Hardware and Software Requirements Software: • Mellanox OFED or WinOF VPI Hardware: • IBM Flex System adapter Installing the IBM Flex System adapter...
Page 25
IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
If you cannot locate and correct a problem by using the information in this section, see Appendix A, “Getting help and technical assistance,” on page 19. Parts listing unit unit unit Table 2 - Part CRU Number CRU number Part (Tier 1) IBM Flex System EN4132 2-port 10Gb Ethernet Adapter 90Y3469 Solving problems...
Page 27
IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Using the documentation Getting help and information from the World Wide Web Software service and support IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
IBM, the IBM logo, and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at "Copyright and trademark information" at http://www.ibm.com/legal/copytrade.shtml Adobe and PostScript are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Important notes This product is not intended to be connected directly or indirectly by any means whatsoever to interfaces of public telecommunications networks, nor is it intended to be used in a public services network. Document format...
Electronic emission notices IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Page 37
IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...
Page 38
This is electromagnetic wave compatibility equipment for business (Type A). Sellers and users need to pay attention to it. This is for any areas other than home.
Page 39
IBM Flex System EN4132 2-port 10Gb Ethernet Adapter User’s Guide...