Display Assembly - HP 430 Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for 430:
- Limited warranty (33 pages) ,
- Quickspecs (30 pages) ,
- Limited warranty and technical support (17 pages)
Table of Contents
Advertisement
10.
Remove the power connector (4).
Reverse this procedure to install the power connector cable.
Display assembly
Description
14.0-in, HD, LED, display assembly (includes microphone and wireless antenna transceivers and cables)
For use with all computer models:
AntiGlare in pewter finish
BrightView in pewter finish
For use only with Compaq 435 and Compaq 436 computer models:
AntiGlare in charcoal gray finish
BrightView in charcoal gray finish
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
68
Chapter 4 Removal and replacement procedures
Battery on page
43).
Spare part number
646666-001
646664-001
647607-001
645984-001
Hide quick links:
Advertisement
Table of Contents
