HP 430 Maintenance And Service Manual page 98

Description
Intel Celeron DC T3300 2.00-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC B950 2.10-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC B940 2.00-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC C925 2.30-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC C900 2.20-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Intel Celeron SC B810 1.60-GHz processor (1.0-MB L2 cache, 800-MHz FSB)
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
WLAN module (see
●
Keyboard (see
●
Top cover (see
●
Speakers (see
●
USB board (see
●
Power connector cable (see
●
Display assembly (see
●
System board (see
●
Fan/heat sink assembly (see
Remove the processor:
1. Use a flat-bladed screw driver to turn the processor locking screw one-half turn
counterclockwise (1), until you hear a click.
90 Chapter 4 Removal and replacement procedures
Battery on page 43), and then remove the following components:
WLAN module on page
Keyboard on page 53)
Top cover on page 56)
Speakers on page 63)
USB board on page 65)
Power connector cable on page
Display assembly on page
System board on page
Fan/heat sink assembly on page
44)
66)
68)
76)
83)
Spare part number
592399-001
653338-001
653337-001
636636-001
534419-001
646760-001