Measuring Weight Only; Error Displays - Omron KaradaScan HBF-358-BW Instruction Manual

HBF-904-APBW.fm Page 11 Friday, October 28, 2011 5:00 PM

5. Measuring Weight Only

Take measurement directly, and do not take out the operation panel from the holder.
* It is not necessary to set personal data when measuring weight only.
1.
Turn on the power.
"CAL" blinks on the
display, then the display
changes to "0.0 kg".
* If you step onto the
unit before "0.0 kg"
appears on the
display, an error
message "Err" will
appear.

6. Error Displays

Error Display Cause
Your palms or soles are not in firm
contact with the electrodes.
The posture for measurement is wrong or
the palms or soles are not in firm contact
with the electrodes.
The palms or soles are too dry.
Values of body composition are out of
measurable range.
Abnormal operation.
You stepped on the unit before the
display indicated "0.0 kg".
You moved the main unit before the
display indicated "0.0 kg".
You moved your body while measuring
body weight.
Your weight is 150 kg or over.
2.
When the "0.0 kg" is displayed, step
onto the unit.
Note: Leave the display unit in the display
unit holder.
3.
Check the measurement result.
Your weight is displayed and blinks twice to
indicate that measurement is completed.
Note: You can also check the measurement
result by taking out the display unit.
4.
When the measurement is completed,
step down from the unit and turn off
the power.
Correction
Press your palms or soles firmly to the
electrodes, then measure. (Refer to Section 4.)
Measure without moving the hands or soles.
(Refer to Section 4.)
Moisten the palms or soles with a wet towel,
then repeat measurement.
• Please ensure that age, gender and height
settings stored as personal data are correct
(see Setting Items in Section 9).
• The main unit cannot measure body
composition outside its measurement range,
even if the Age, Gender and Height settings
are correct. (Refer to Section 3).
Insert the batteries again and repeat
measurement.
If this error still occurs, consult your OMRON
service representative.
Step on the main unit after the display indicates
"0.0 kg".
Do not move the main unit until the display
indicates "0.0 kg".
Do not move while measuring body weight.
Body weight of 150 kg or over is out of the
measuring range of this unit. You cannot use
this unit.
11