Blanco OE606X Instructions For The Use And Care And Installation page 18

CLEANING AND MAINTENANCE
Cleaning the oven door
ATTENTION: for your safety, before removing the glasses you should
1. Set the oven door wide open.
2. Lift the hinge jumpers with your thumb and index fingers, then turn them fully
outwards to the end of stroke (Fig.A).
3. Turn the door towards the closure position and lay it on the jumpers: in this
way the hinge's spring is blocked. By fully closing the door the hinges are
unhooked from the connection slits which are integral with the oven muffle
(sequence 1,2,3 of fig.B).
A
Re-assemble the door by carrying-out the aforesaid operations in the opposite
order.
Disassembling of the door glasses
To facilitate the cleaning, after having removed the door from the oven, you
can proceed with the disassembly of the glass. Release the two upper
blocks (picture C) so that the glass can be removed (picture D). After
the cleaning you should reassemble the glass, replace the blocks and
lock into position. Check that all components have been assembled correctly
and than you can re-assemble the door onto the oven.
18
remove the oven door.
B
C
Please keep the OK symbol below on the right.
D