Changing The Type Of Ink - Roland CJ-540 User Manual

3-8 Changing the Type of Ink

When changing the type of ink in use, follow the steps below to replace the ink.
Ink replacement requires four optionally available cleaning cartridges. You can perform cleaning three times per clean-
ing cartridge.
Press the [MENU] key and [
1
the following screen appear on the display.
Press the [ ] key to make the following screen
2
appear on the display.
3 Use the [ ] key to select [CHANGE INK SET],
then press the [
Use the [ ] and [
4
type of ink to use, then press the [ENTER] key.
When the display shown in the figure appears,
5
discard the discharged ink in the drain bottle.
Be sure to discard the discharged ink.
Attempting to replace the ink while discharged ink
remains may cause discharged ink to overflow from
the bottle.
] key to make
] key.
] keys to select the new
PIG LcLm
PIG OrGr
DYE LcLm
INK CONTROL
EMPTY MODE
INK CONTROL
CHANGE INK SET
CHANGE INK SET
PIG LcLm
: Pigmented ink (cyan, magenta, yellow, black, light
cyan, light magenta)
: Pigmented ink (cyan, magenta, yellow, black, orange,
green)
: Dye-based ink (cyan, magenta, yellow, black, light
cyan, light magenta)
EMPTY
DRAIN BOTTLE
Chapter 3 - A Wide Variety of Operations
MENU
INK CONTROL
Continued on the next page
71