IBM IntelliStation M Pro 9229 Installation Manual page 30

v Hard disk drive capacities affect how you create arrays. The drives in an array
v If you use an integrated SAS/SATA controller with RAID capabilities to configure
v If you install a different type of RAID controller, see the documentation that
To start the LSI Logic Configuration Utility program, complete the following steps:
1. Turn on the computer.
2. When the message <<< Press <CTRL><C> to start LSI Logic Configuration
3. Use the arrow keys to select a controller (channel) from the list of adapters;
4. To change the settings of the selected items, follow the instructions on the
See the User's Guide on the IBM IntelliStation Documentation CD for more
information about the LSI Logic Configuration Utility program.
18
IBM IntelliStation M Pro Type 9229: Installation Guide
can have different capacities, but the RAID controller treats them as if they all
have the capacity of the smallest hard disk drive.
a RAID 1 (mirrored) array after you have installed the operating system, you will
lose access to any data or applications that were previously stored on the
secondary drive of the mirrored pair.
comes with the controller for information about viewing and changing SAS/SATA
settings for attached devices.
Utility >>> is displayed, press Ctrl+C.
then, press Enter.
screen. If you select Raid Properties, SAS Topology, or Advanced Adapter
Properties additional screens are displayed.