Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna 455 Rancher II Operator's Manual

Hide thumbs Also See for 455 Rancher II:
Table of Contents

Advertisement

Symbols on the machine:

WARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community's Directive. The machine's
emission is specified in the Technical
data chapter and on the label.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
Decompression v alve: The valve is to
reduce the pressure in the cylinder and
make starting easier. You should always
use the decompression valve when
starting the machine.
Ignition; choke: Set the choke control in
the choke position. This should
automatically set the stop switch to the
start position.
Adjustment of the oil pump.
Refuelling.
Chain oil fill.
Air purge.
2 – English

KEY TO SYMBOLS

Chain brake, activated (right) Chain
brake, not activated (left)
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Symbols in the operator's
manual:
Switch off the engine by moving
the stop switch to the STOP
position before carrying out any
checks or maintenance.
CAUTION! The start/stop switch
automatically returns to run
position. In order to prevent unintentional starting, the
spark plug cap must be removed from the spark plug
when assembling, checking and/or performing
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

455e rancher ii triobrake460 rancher ii465 rancher ii

Table of Contents