m. Remove the two Phillips PM2.0×3.0 screws (1) that secure the display hinge covers to the
display hinges.
n.
Remove the display hinge covers (2) by sliding them off of the display hinges. The display
hinge covers are available in the Display Hinge Kit, spare part numbers 613328-001 (for
use only on computer models equipped with a 15.6-in display assembly) and 613327-001
(for use only on computer models equipped with a 14.0-in display assembly).
16.
If it is necessary to replace the WLAN antenna transceivers and cables:
a.
Release the tabs (1) built into the display enclosure shielding that secure the WLAN
antenna cables.
b.
Detach the WLAN antenna transceivers (2) from the display enclosure. (The transceivers
are attached to the enclosure with double-sided tape.)
c.
Remove the WLAN antenna transceivers (3) and cables. The WLAN antenna transceivers
and cables are included in the Display Cable Kit, using the following spare part numbers:
●
●
116 Chapter 4 Removal and replacement procedures
583956-001–For use only on computer models equipped with a 15.6-in HD+ display
assembly
589230-001–For use only on computer models equipped with a 15.6-in HD display
assembly