Introducing The Hp Procurve 10/100 Hubs - HP ProCurve 10/100 12 Installation Manual

Introducing the HP ProCurve 10/100 Hubs

The HP ProCurve J3294A and HP J3295A 10/100 hubs are low-cost multiport,
dual-speed, 10- and 100Mbps repeaters that can be used to build high-
performance workgroup networks. These hubs are completely autosensing
and autonegotiating devices that provide the flexibility of adjusting to
different speed settings. The hubs are always half-duplex. This capability is
present provided that the connecting device is autonegotiation-capable or
already configured to half-duplex, and will autonegotiate with other
autonegotiating or half-duplex devices.
The two hub models are:
Throughout this manual, these hubs will be abbreviated as the HP 10/100 hubs.
The HP 10/100 Hub 12 and Hub 24 have twelve and twenty-four dual-speed,
10/100Base-T ports, respectively.
With these hubs you can build a network infrastructure by connecting the hubs
to other hubs, switches, or routers, or you can connect computers, printers,
and servers to these hubs to provide dedicated 10- or 100Mbps bandwidth to
those devices.
HP ProCurve J3294A 10/100 Hub 12
HP ProCurve J3295A 10/100 Hub 24
1
1-1