Table of Contents
Advertisement
Keys and Remote Control
Programming Memory to the Transmitter
1. Move the memory features to the desired positions using the
associated controls.
3. Within three seconds press lock button on the remote control.
4. Wait 10 seconds, then press unlock button on the remote control.
5. Repeat this procedure for another memory button and transmitter if
desired.
Deactivating Memory from the Transmitter
1. Press and hold the desired button for five seconds. A tone will sound
when the memory store is done. Continue to hold until a second tone is
heard.
2. Within three seconds press the unlock button on the remote control.
3. Repeat this procedure for each additional transmitter if desired.
Car Finder
Press the button twice within three seconds. The horn will sound
and the turn signals will flash. We recommend you use this method
to locate your vehicle, rather than using the panic alarm.
Sounding a Panic Alarm
Press the button to activate the alarm. Press the button again
or switch the ignition on to deactivate.
Note: The panic alarm will only operate when the ignition is off.
2014 MKS (mks)
Owners Guide gf, 2nd Printing, December 2013
USA (fus)
2. Press and hold button 1 until a
tone is heard to confirm setting.
Continue to hold until a second
tone is heard.
61
Advertisement
Table of Contents
