Pentax K-30 Operating Manual page 209

Setting the World Time
The date and time set in "Initial Setting" (p.56) serve as the date and time
of your present location. Setting the destination in [World Time] enables
you to display the local date and time on the monitor when traveling
abroad.
1
Select [World Time] in the [R Set-up 1] menu, and press the
four-way controller (5).
The [World Time] screen appears.
2
Use the four-way controller (45) to
select X (Destination) or W
(Hometown) for [Time Setting].
This setting is reflected in the date and
time that appear in the control panel.
3
Press the four-way controller (3) to select [X Destination],
and press the four-way controller (5).
The [X Destination] screen appears.
4
Use the four-way controller (45) to
select a destination city.
Turn the rear e-dial (S) to change the
region.
The location, time difference and current
time of the selected city appear.
5
Press the four-way controller (3) to select [DST], and use the
four-way controller (45) to select P or O.
Select O if the destination city uses daylight saving time (DST).
6
Press the 4 button.
The destination setting is saved and the screen that was displayed in
Step 2 appears again.
World Time World Time
Time Setting Time Setting
Destination Destination
London London
Hometown Hometown
New York New York
MENU
Destination Destination
London London
DST DST
Cancel Cancel
MENU
207
16:00 16:00
10:00 10:00
7
+06:00 +06:00
16:00 16:00
OK OK
OK