2. Remove the two metal knockouts.
3. Insert the U-bolt through the rear panel. Attach and tighten the nuts with an
4. Replace the computer cover. See "Replacing the cover" on page 26.
5. Thread the cable through the U-bolt and around an object that is not a part of
Installing adapters
Adapter slots
To install an adapter in a PCI or AGP expansion slot, do the following:
1. Remove the cover (see "Removing the cover" on page 15).
22
Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer
1
U-bolt
2
Bolt holes
3
Nuts
appropriately sized or adjustable wrench.
or permanently secured to the building structure or foundation, and from
which it cannot be removed; then fasten the cable ends together with a lock.