IBM A40I TYPE 2271 Hardware Maintenance Manual page 134

3. Check the power cord for the following:
4. Remove the cover.
5. Check for any obvious non-IBM alterations. Use good judgment as to the safety
6. Check inside the unit for any obvious unsafe conditions, such as metal filings,
7. Check for worn, frayed, or pinched cables.
8. Check that the power-supply cover fasteners (screws or rivets) have not been
128
Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer
a. A third-wire ground connector in good condition. Use a meter to measure
third-wire ground continuity for 0.1 ohm or less between the external
ground pin and frame ground.
b. The power cord should be the appropriate type as specified in the parts
listings.
c. Insulation must not be frayed or worn.
of any non-IBM alterations.
contamination, water or other liquids, or signs of fire or smoke damage.
removed or tampered with.