Charging Your Remote; Using The Sleep Timer - Logitech Harmony 900 Quick Start Manual

Charging your remote

Your Harmony 900 comes with a charging station.
The charging station plugs into a wall outlet and
charges the battery every time you put the remote
on it. All you need to do is pick up the Harmony 900,
use it, and place it back on the charging station when
you're done to ensure it stays charged.

Using the sleep timer

Your Harmony 900 allows you to set a time for your remote to automatically turn off.
For example, if you want to watch the news before you nod off to sleep, you can set the sleep timer
so that your remote will turn your system off after the length of time you have chosen.
To set the sleep timer:
1.
2.
3.
You will be given 30 seconds notice before your remote's sleep timer will
turn your system off. You will be able to Cancel the timer if you would like
your system to stay on.
24
No waiting to charge
Your battery is a lithium ion so you don't have to wait until your remote goes dead to
charge it. You can place it on the charger at any time to give your remote a bit more
power.
On your remote's My Activities screen, press Set Sleep Timer.
Select the length of time you want the timer to run for.
When your timer is set, the remaining time left will appear on
your remote's My Activities screen.
*
Sleep Timer
Select the time to automatically
turn off your system
15 min 30 min
60 min
90 min
120 min
150 min
Cancel