Setting Up Telephone - Nortel M7324 Quick Reference Manual

Setting up the telephone
Connecting the cords
ATTENTION Before attempting to carry
out any work on the telephone, ensure
that the line cord is unplugged from the
wall socket.
To remove any of the cords, squeeze the
release latch on the plug and gently pull
the plug from the socket.
Connect the handset cord to the jack
labelled with the telephone icon and route
the cord as shown.
Connect to jack
If you are using a headset, route the cord
from distribution block
along the channel in the base and connect
the cord to the telephone jack that is
marked with the headset icon.
Connect to receiver
Route the line cord through the stand and
connect the cord to the telephone jack
that is marked with the jack icon.
Attach the stand using the slots on the
back of the telephone.
Once the above work is complete, plug
the line cord back into its wall socket.
Page 5 Enterprise Edge M7324 Quick Feature Guide P0908514 Issue 03