Table of Contents
Advertisement
98
Keep the outside of the windshield clean, especially the area around the
interior mirror where the sensor is located, or sensor performance may
be affected.
WINDSHIELD WASHERS
Note: Do not operate the wipers on a dry windshield. This may scratch
the glass, damage the wiper blades or cause the wiper motor to burn out.
Always use the windshield washer before wiping a dry windshield.
Note: Do not operate the washer when the washer reservoir is empty.
This may cause the washer pump to overheat.
• A brief press causes a single wipe without washer fluid.
• A quick press and hold causes the wipers to swipe three times with
washer fluid.
• A long press and hold will activate the wipers and washer fluid for up
to 10 seconds.
A wipe will occur a few seconds after washing to clear any remaining washer
fluid. This feature can be turned on and off in the information display.
REAR-WINDOW WIPER AND WASHERS
Rotate and hold the control to either the top or bottom position to
activate the rear washer. The control will return to the 2 or 0 position
when you release it.
2014 Flex (471)
Owners Guide gf, 2nd Printing, November 2013
USA (fus)
Wipers and Washers
Press the end of the stalk to
activate the washer.
Rotate the control to select:
2 — Intermittent operation
(shortest pause between wipes).
1 — Intermittent operation
(longest pause between wipes).
0 — Off.
Advertisement
Table of Contents
