Table of Contents
Advertisement
Keys and Remote Control
Replacing the Battery
Note: Refer to local regulations when disposing of transmitter batteries.
Note: Do not wipe off any grease on the battery terminals or on the
back surface of the circuit board.
Note: Replacing the battery will not delete the transmitter from your
vehicle. The transmitter should operate normally.
The remote control uses one coin-type three-volt lithium battery CR2032
or equivalent.
Integrated Keyhead Transmitter
4. Insert the new battery. Refer to the instructions inside the integrated
keyhead transmitter for the correct orientation of the battery. Press the
battery down to ensure that the battery is fully seated in the battery
housing cavity.
5. Reinstall the rubber gasket.
6. Snap the battery cover back onto the key.
2014 Flex (471)
Owners Guide gf, 2nd Printing, November 2013
USA (fus)
Note: Your vehicle's back-up keys
came with a security tag that
provides important key cut
information. Keep the tag in a safe
place for future reference.
1. Twist a thin coin in the slot near the key
1
ring to remove the battery cover (1).
2. Carefully peel up the rubber gasket (2)
from the transmitter if it does not come off
2
with the battery cover.
3. Remove the old battery (3).
3
65
Advertisement
Table of Contents
