Ford FLEX 2014 Owner's Manual page 133

Table of Contents

Advertisement

132
Keys and Intelligent
Access Messages
Max Number of Keys
Learned
Press Brake to Start
Restart Now or Key is
Needed
Accessory Power is
Active
Starting System Fault
Maintenance
Messages
LOW Engine Oil
Pressure
Change Engine Oil
Soon
Oil Change Required
Engine Coolant
Overtemperature
Washer Fluid Level
LOW
Steering Malfunction
Service Now
2014 Flex (471)
Owners Guide gf, 2nd Printing, November 2013
USA (fus)
Information Displays
Action / Description
Displayed during spare key programming when
the maximum number of keys have been
programmed.
Displayed when the start/stop button is
pressed without the brake pedal being applied.
This is a reminder that the brake pedal must
be applied when the start/stop button is
pressed in order to start the engine.
Displayed when the start/stop button is
pressed to shut off the engine and a Intelligent
Access Key is not detected inside the vehicle.
Displayed when the vehicle is in the accessory
ignition state.
This message is displayed when there is a
problem with your vehicle's starting system.
See your authorized dealer for service.
Action / Description
Stop the vehicle as soon as safely possible,
turn off the engine. Check the oil level. If the
warning stays on or continues to come on with
your engine running, contact your authorized
dealer as soon as possible.
Displayed when the engine oil life remaining is
10% or less.
Displayed when the oil life left reaches 0%.
Displayed when the engine coolant
temperature is excessively high.
Indicates the washer fluid reservoir is less than
one quarter full. Check the washer fluid level.
Displays when the steering system needs
service. See your authorized dealer.

Advertisement

Table of Contents
loading

Table of Contents