Rear Panel - Zte ZXHN H108N User Manual

Identification
WLAN
USB
WPS

Rear panel

Item
RJ-11 connection interface: The equipment is connected to the ADSL line or splitter via
DSL
the telephone line.
RJ-45 connection interface: Connect it to the PC computer or other network devices using
LAN1-LAN4
the network cable.
WPS WPS switch
Color Status
Off
Steady on
Flashing
Green
Off
Steady on
Flashing
Green
Off
On
Slowly
flashing
Quickly
Green
flashing
Off
Figure 3.1-2 Rear Panel of the ZXHN H108N
Table 3.1-2 Description of Interfaces on the Rear Panel
ZXHN H108N User's Manual
Description
The device is not powered on or the LAN
connection has not been established
The wireless port is enabled.
Data is transmitting.
frequency indicates the WLAN traffic.
The device is not powered on or the
wireless port is disabled.
A USB device, such as hard disk is
connected.
Data is transmitting.
The device is not powered on or the USB
device connection
established.
The wireless terminal device is connected
through WPS successfully. The indicator
turns off five minutes later.
The wireless terminal device is connecting
with H108N through WPS.
There is error when the wireless terminal
is connecting to H108N through WPS.
There is no wireless terminal device
connected to H108N through WPS or the
wireless terminal
connected to H108N through WPS for
more than five minutes.
Introduction
7
The flashing
has not been
device has been