No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photo- copying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: 1.0...
Introduction The Power Surf USB modem is a multi-mode USB modem, working in HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM networks. With USB interface connect- ing to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile phone (SMS), and combines mobile communication with Internet perfectly.
Insert the microSD card into the microSD card slot. Hardware Installation Notes: This modem only supports microSD card. Press and push the front cover and remove it. Insert your microSD card into the microSD card slot, shown as the fol- lowing picture.
Connect the Modem to your laptop or desktop PC. • Plug the USB connector into your computer’s USB port and make sure that it is tightly inserted. • The OS automatically detects and recognizes new hardware and starts the installation wizard. Installing the USB stick Management Program Connect the USB Stick with the PC.
Starting the Management Program After being installed, the management program starts automatically. Then every time the USB Stick is connected to the PC. the management program starts automatically. You can also double dick the shortcut icon on the desktop to start the management program. Removing the USB stick Double click >...
Warning and Notice To the Owner • Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary. •...
Page 17
Use Your USB Modem • Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your modem’s performance, and violate related national regulations about telecom terminals. • Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic waves. Otherwise it may influence signal reception.
Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations. •...
Page 19
Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to...