Miele DGC 4084 XL Operating Instructions Manual page 62

Frequently asked questions
Problem
F and a number
appear in the
display
F 10
F 44
F 195
F 55
F 94
62
Possible fault
The suction hose in the
water container is:
– not properly attached
– not vertical
Communications failure
The maximum duration
for operating on a
function has been
exceeded, the safety
shutdown has turned the
appliance off.
No water intake:
– The water inlet valve is
closed.
– The left float in the
water container is
disconnected.
Solution
Correct the position of the
suction hose:
Turn the appliance off and after a
few minutes on again.
If the fault message still appears,
contact Miele Technical Service.
The appliance can be used
again immediately by turning it
off and back on again.
Open the water inlet valve and
start the operation again.
Restore the free movement of the
float.
If the error message shows again
in spite of solving the problem,
contact Miele Technical Service.