Miele DGC 4084 XL Operating Instructions Manual page 56

Cleaning and Care
To dismantle the door
56
The door is protected all around by seals against the
penetration of vapors.
If soiling builds up in the space between the glass panels,
you can disassemble the door to clean the inside of the
glass.
Do not use abrasive cleaners, hard sponges or brushes or
sharp metal scrapers for cleaning glass surfaces. You will
scratch the surface.
Do not use oven cleaner. The surface of the aluminum will
be damaged. Make sure that the glass panels are put
back into the correct position after cleaning, since the
individual sides of the panels are coated differently. The
sides facing the oven interior are heat-reflective.
Store the removed panes safely so they do not break.
,
Always remove the door before you disassemble it.
Place the door on a soft surface (such as a towel) to prevent
scratches. It is advisable to put the handle next to the table
edge, so that the glass is lying flat and cannot break during
cleaning.
^ Unscrew the Torx screws, and remove the retainers.