Lighting; Change Main Menu; Preheating Phase; Start - Miele DGC 4084 XL Operating Instructions Manual

Lighting

Change main menu

Preheating phase

Start

Steam reduction

You can choose whether you want the oven cavity to be
illuminated throughout the cooking program or only for
15 seconds.
You can change the order of options in the main menu by
placing up to three options (except the Settings option) at the
beginning of the main menu.
You can also specify the position of the option in the list.
The Preheating phase can be changed for the
"ConvectionPlus" and "Surround" functions.
Rapid
(factory default)
All heating elements are turned on so that the appliance is
heated to the desired temperature as quickly as possible.
The display shows the message "Rapid preheat".
Standard
Only the heating elements of the selected function are turned
on. The display shows the message "Preheating".
The appliance has been set at the factory so that the program
will start automatically a few seconds after the last entry is
made. You can change this setting so that the program has to
be started manually.
This function can be activated or deactivated. It is best to
deactivate it when you are cooking different types of food at
the same time, e.g. when the dishes need to be put into the
combi-steam oven at different times.
Please note that when steam reduction is deactivated steam
will escape when you open the door and that the Keep warm
function cannot be used.
This function is deactivated as the factory default setting.
Settings
41