Miele DGC 4084 XL Installation Instructions Manual

Combi-steam oven
Hide thumbs Also See for DGC 4084 XL:

Advertisement

Installation Instructions

Combi-Steam Oven
DGC 4084 XL
DGC 4086 XL
en - US, CA
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 09 064 870

Advertisement

Table of Contents
loading

Summary of Contents for Miele DGC 4084 XL

  • Page 1: Installation Instructions

    Installation Instructions Combi-Steam Oven DGC 4084 XL DGC 4086 XL en - US, CA To prevent accidents and appliance damage read these instructions before installation or use. M.-Nr. 09 064 870...
  • Page 2: Table Of Contents

    Contents IMPORTANT INSTALLATION SAFETY INSTRUCTIONS ....3 Installation ............4 Cut-out for venting the combi-steam oven .
  • Page 3: Important Installation Safety Instructions

    Installation, repair and maintenance system. It is imperative that this basic work should be performed by a Miele safety requirement be met. If there is authorized service technician. Work by any doubt, have the electrical system of...
  • Page 4: Installation

    Installation Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer or installer. Dimension details of the appliance front 7/8" 22*/23** 7/8" 47,5...
  • Page 5 Installation Dimension to allow the control panel to open and close The area in front of the control panel must not be blocked by anything (such as a door handle) this would hinder the control panel from opening and closing.
  • Page 6: Cut-Out For Venting The Combi-Steam Oven

    Installation Cut-out for venting the combi-steam oven Installation in a tall cabinet 5 / 8 " 5 / 8 " ( 4 0 m ( 5 0 0 m To ensure that the combi-steam oven has adequate ventilation, the following cut-outs measuring 19 "...
  • Page 7 Installation Installation under a countertop 5 / 8 " m m ) ( 5 0 0 8 " To ensure that the combi-steam oven has adequate ventilation, the following cut-outs measuring 19 " x 1 " (500 x 40 mm) must be provided: in the appliance support shelf in the bottom of the cabinet space below it...
  • Page 8: Appliance And Installation Dimensions

    Appliance and installation dimensions Installation in a tall cabinet ( 5 0 0 m m ( 4 0 Combi-steam oven b Installation niche Terminal block Outlet or junction box This should be accessible after the appliance has been installed. Power cord (5 ft.) * Appliances with glass front / ** Appliances with metal front...
  • Page 9: Installation Under A Countertop

    Appliance and installation dimensions Installation under a countertop If the appliance is be installed under a cooktop, observe the installation instructions for the cooktop and its installation height. m m ) ( 5 0 0 ( 4 0 Combi-steam oven Installation niche Terminal block Outlet or junction box...
  • Page 10: Installation In Combination With An Oven

    Appliance and installation dimensions Installation in combination with an oven ( 5 0 0 m m ( 4 0 ( 5 4 Combi-steam oven Installation niche Terminal block Outlet or junction box This should be accessible after the appliance has been installed. Power cord (5 ft.) Oven * Appliances with glass front / **...
  • Page 11: Installation In Combination With Esw 408X-14

    Appliance and installation dimensions Installation in combination with ESW 408x-14 ( 5 0 0 m m ( 4 0 Combi-steam oven Installation niche Terminal block Outlet or junction box This should be accessible after the appliance has been installed. Power cord (5 ft.) Built-in plate warmer / built-in food warmer * Appliances with glass front / ** Appliances with metal front...
  • Page 12: Installation In Combination With Esw 408X-14 Brws

    Appliance and installation dimensions Installation in combination with ESW 408x-14 BRWS ( 5 0 0 m m ( 4 0 Combi-steam oven Installation niche Terminal block Outlet or junction box This should be accessible after the appliance has been installed. Power cord (5 ft.) Built-in plate warmer / built-in food warmer * Appliances with glass front / **...
  • Page 13: Installing The Appliance

    Appliance and installation dimensions Installing the appliance ^ Push the appliance into the cabinet niche and align it. The device must be level, so that the steam generator can operate properly. Deviation from a horizontal position should not exceed 2°. ^ Secure the appliance by screwing the two 3.5 x 25 mm wood screws (supplied) into the vertical strips on either side of the housing.
  • Page 14: Electrical Connection

    WARNING: please consult a licensed electrician THIS APPLIANCE MUST BE or contact Miele’s Technical Service GROUNDED! Department. Installer: Please leave these instructions with the consumer.
  • Page 16 Alteration rights reserved / 1013 M.-Nr. 09 064 870 / 03 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.

Table of Contents