Denso AT20B-SM User Manual page 8

To System Designers:
 When introducing the scanner in those systems that could affect human lives (e.g., medicines
management system), develop applications carefully through redundancy and safety design
which avoids the feasibility of affecting human lives even if a data error occurs.
 Never bring any metals into contact with the terminals in connectors.
Doing so could produce a large current through the scanner, resulting in heat or fire, as well as
damage to the scanner.
 Keep the AC adapter away from water.
Failure to do so could cause fire or electrical shock.
 Never use the scanner on the line voltage other than the specified level.
Doing so could cause the scanner to break or burn.
 Do not use the scanner where any inflammable gases may be emitted.
Doing so could cause fire.
 Do not scratch, modify, bend, twist, pull, or heat the power cable of the AC adapter. Do not place
heavy material on the cable or allow the cable to get pressed under heavy material.
Doing so could break the cable, resulting in a fire.
 Do not subject the reading window of the scanner to direct sunlight for extended periods.
Doing so could damage the scanner, resulting in a fire.
 If smoke, abnormal odors or noises come from the scanner, immediately switch off the host
computer, disconnect the AC adapter and the interface cable, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
 If foreign material or water gets into the scanner, immediately unplug the AC adapter and the
interface cable, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
 If you drop the scanner so as to affect the operation or damage its housing, switch off the host
computer, unplug the AC adapter and the interface cable, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
iv