Denso AT20B-SM User Manual page 78

Item
Number of extracted digits
(3 blocks max)
NOTE 1 : "Any code" means all data can be edited.
Item
AI mode
AI split mode:
AI1 selection enable/disable
AI split mode:
AI2 selection enable/disable
AI split mode:
AI3 selection enable/disable
AI split mode:
AI selection AI1
AI split mode:
AI selection AI2
AI split mode:
AI selection AI3
AI split mode:
Delimiter
Conversion mode:
Number of characters and
character type
Blocksorting mode:
Number of blocks
Blocksorting mode:
Split position
Blocksorting mode:
Output order
NOTE 2 : Refer the Chapter 7 "7.2.1.3 (3) AI table" about the detail of AI.
Parameter
1 to 99 digits
in ASCII characters
：
These can be selected only with the configuration software (Scanner Setting).
Parameter
AI split mode
AI parenthesis mode
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Select from candidate AIs (NOTE 2)
Select from candidate AIs (NOTE 2)
Select from candidate AIs (NOTE 2)
Header/Terminator
Comma
Tab
16 characters max
in ASCII characters
2 to 5 blocks
1 to 9999 digits
in ASCII characters
BLOCK1 to BLOCK5
：
These can be selected only with the configuration software (Scanner Setting).
67
Default Reference
Not defined
Default Reference




Chapter 7
Section 7.2
00
00
00

Not defined
2 blocks
Chapter 7
Section 7.2
1 char.
BLOCK1/
BLOCK2