Audio Device And Sample Rate; Options Menu - PRESONUS StudioLive 16.0.2 Owner's Manual

2 Start Page
2.4

Audio Device and Sample Rate

2.4 Audio Device and Sample Rate
2.5

Options Menu

Capture 2.0 was created for use with PreSonus StudioLive-series mixers
and fully functions only with that device. The Audio Device menu displays
the currently selected audio driver. When a StudioLive is connected, you
should select "PreSonus FireStudio" from the Audio Device list.
If the currently selected audio device has exactly two outputs (as with the built-
in audio card in a Mac), Capture goes into Stereo mode. While in Stereo mode,
Capture connects all tracks to the stereo output and adjusts the volume of the
output automatically to account for stereo summing. Stereo mode enables you
to listen to Sessions while away from your StudioLive. Unless the StudioLive's
driver is selected, you cannot create a new Session or record new audio.
The Sample Rate menu displays the currently configured sample rate.
The Options button can be found just above the bottom of the Start page. This
launches the Options menu.
This menu can also be accessed from Capture>Options.
It can also be accessed by clicking on the Options button on
the Session page.
The Options menu provides all the tools necessary
to configure your Session preferences.
Capture 2.0 Software
™
Reference Manual
8