PRESONUS StudioLive 16.0.2 Owner's Manual page 225

7 Studio One Artist Quick Start
7.3 Creating a New Song
13. Click on the Outputs tab, and you will see all of the available
14. Be sure to patch the Main Out bus to the Main FireWire return on
15. In the lower right corner, you will see the Audition select menu. This allows you to
16. If you would like this output configuration available every time you
17. Click Apply to finish.
outputs on your StudioLive. We recommend that you create a mono
output for each of your StudioLive's FireWire Returns and a stereo
output for the Main FireWire Return on your StudioLive.
your StudioLive (16.0.2: Returns 1/2; 16.4.2: 2TrackIn Left/Right,
Returns 17/18; 24.4.2: 2TrackIn Left/Right, Returns 25/26).
choose the output from which you will audition audio files prior to importing them
into Studio One Artist. In general, you will want this to be the main output bus.
launch Studio One Artist, click the Make Default button.
Now that you've configured your MIDI and audio I/O and created a new Song, let's
go through some of the basics of Studio One Artist so you can start recording!
StudioLive Software Library
™
Reference Manual
119