5
QMix for iPhone and iPod touch
5.1
Networking your iPhone or iPod touch and Computer
Windows 8
Mac OS X 10.6 / 10.7
5.1.2 Step 2: Connect your iPhone/iPod Touch to your Ad Hoc Network
6. Click on "Next" twice.
7. Enter a network name, such as "StudioLive. "
8. Select the Security WAP (or WEP).
9. Enter the Security key or password. For the best security, include
letters, numbers, and punctuation. Then click OK.
10. Check "Save this network. "
11. Click "Turn on Internet connection sharing. "
Windows 8 does not natively support ad hoc connections.
Therefore, we recommend that Windows 8 users employ a
wireless router, rather than setting up an ad hoc network.
1. On the Menu bar click on the Wireless Status Icon.
2. From the pull-down menu select "Create Network..."
3. Give your Network a name, such as "StudioLive. "
4. If you would like set up a password (recommended), check "Require Password. "
5. Create your password within the guidelines and click "OK. "
6. Once your network has been successfully created, you
will see it in your list of available networks.
1. Tap on the Settings icon in your iPhone/iPod touch.
2.
Tap on "General. "
3.
Tap on "Network. "
4.
Tap on "Wi-Fi" making sure it is set to "On. "
5.
Under "Choose a Network, " you should now
see your ad hoc network in the list.
6.
Tap on your newly created network to select it.
7.
If you secured your network with a password, you will be prompted
to enter it.
StudioLive
Software Library
™
Reference Manual
75