Toshiba IP5000 Series User Manual page 54

IPedge
Feature Operations
Supervising a Tandem
Conference Add, Split,
Join, and Drop
Add an Incoming call to
the Conference
Split from a conference
50
1. While on an outside call, press Cnf/Trn. A dial tone is heard and the
extension LED flashes (conference rate.)
Call
2. Dial an outside telephone number.
3. After party answers, press Cnf/Trn. Extension LED flashes (in-use rate)
and all parties are conferenced.
4. If busy/no answer, press the flashing extension button to return to the
original connection.
5. Press Cnf/Trn and hang up. The extension LED flashes (exclusive-hold
rate) and the two lines are connected. The LED turns off when the parties
hang-up.
6. To supervise a tandem call, press the extension button. If the parties have
finished, hang up. If the parties are still talking, press Cnf/Trn and hang-
up. Both Line LEDs turn off and the connection is released.
If your telephone service provider offers automatic disconnect
Note:
supervision, the connection will release automatically when the
parties hang up. If not, the lines must be supervised and manually
disconnected.
If a conference is initiated with two or more parties, outside callers may be
added to conference, or you and another member of the conference may
leave (Split) the conference for a private conversation. All conference
members remain connected during a split call.
Conference master may "join" both "split" parties back into the conference, or
disconnect (Drop) the connected party. This feature is performed with Soft
Keys if you have a LCD phone or with a Split button programmed on one of
the Programmable Feature Buttons.
Important!
1. Place the first caller/conference on hold.
2. Answer the incoming ringing call.
3. When incoming caller is on the line, press Cnf/Trn button.
4. Press the blinking DN button where the first caller/Conference was placed
on hold.
5. Press Cnf/Trn twice to join all parties together.
1. While in a conference call on an IP5000-series phone, press the
(Split) soft key or Split button.
2. Press the
NEXT
that you want to Split out of the conference.
3. Return your extension and the other Split party back into the conference
by pressing
TOSHIBA
Only the conference master may perform Add, Split,
Join, and Drop features. The conference master is the
person that initiates the conference call. If that person
drops from the conference, the first person added to
the conference becomes the conference master.
soft key until you see the extension number for the party
.
JOIN
SPLT
IPedge UG 01/13