Basic Softipt Functions; Start The Softipt - Toshiba IP5000 Series User Manual

IPedge
SoftIPT
Basic SoftIPT
Functions

Start the SoftIPT

Making a Call
34
Figure 3 Mail Profiles
• Double-click the SoftIPT icon on your desktop.
To make a call
1. Click Speaker then select the on-screen dial pad buttons to dial a call.
2. When connected to a call, you can select any of the call buttons, such as
Redial, Hold or Conf.
3. Click Speaker to end the call.
Do not use BGM (#490) on the SoftIPT. It conflicts with incoming
Note:
calls.
To make a Call using a USB Handset
To install a USB handset, refer to the vendor's documentation and/or website.
1. Go off-hook (pick up the receiver or press the hook switch button on the
USB Handset) to get dial tone.
2. Dial the phone number - click the on-screen dial pad buttons, input
numbers (asterisk key, pound key) from PC keyboard, or use the key pad
on the USB handset, if available.
3. To end the call, go on-hook (put down the receiver or press the hook
switch button).
TOSHIBA
IPedge UG 01/13