Advanced Wireless - D-Link DIR-868L User Manual

Section 3 - Coniguration
This page allows you to change some of the advanced wireless settings of the DIR-868L. It is recommended that you only change these settings if
you are familiar with their functions and proper settings, or are instructed to do so.
Wireless Band:
This will display which radio band the following
settings will be used for. This top box will
be the settings for the 2.4 GHz band.
Transmit Power:
Set the transmit power of the antennas
for the 2.4 GHz band.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless
speciication developed to allow implementation
of wireless networks in countries that cannot use
the 802.11 standard. This feature should only be
enabled if you are in a country that requires it.
WMM Enable: WMM is QoS for your wireless network. This
will improve the quality of video and voice
applications for your wireless clients.
HT20/40 Enable this option to reduce interference from other
Coexistence:
wireless networks in your area. If the channel width
is operating at 40 MHz and there is another wireless
network's channel over-lapping and causing interference,
the router will automatically change to 20 MHz.
Wireless Band: This will display which radio band settings will be used. This top box will be the settings for the 5 GHz band.
Transmit Power: Set the transmit power of the antennas for the 5 GHz band.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless speciication developed to allow implementation of wireless networks
in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Enable:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Click Save Settings to save the current coniguration.
D-Link DIR-868L User Manual

Advanced Wireless

90