Tools; Admin - D-Link DIR-868L User Manual

Section 3 - Coniguration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that
can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and
user account passwords.

Admin

Here you can enter a new password for the Administrator Login
Password:
Name. The administrator can make changes to the settings.
Password:
Enter the new password for the User login. If you login as the
User, you cannot change the settings (you can only view them).
Then enter the password again for veriication.
Gateway Name:
Enter a name for your router.
Enable Graphical
Enables a challenge-response test to require users to type letters
Authentication:
or numbers from a distorted image displayed on the screen to
prevent online hackers and unauthorized users from gaining
access to your router's network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. This
Server:
means to connect to the router, you must enter https://192.168.0.1
(for example) instead of http://192.168.0.1.
Enable Remote
Remote management allows the DIR-868L to be conigured
Management:
from the Internet by a web browser. A username/password is still
required to access the Web Management interface.
Remote Admin
The port number used to access the DIR-868L is used in the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of
Port:
the DIR-868L and 8080 is the port used for the Web Management interface. If you have enabled HTTPS Server, you must enter https://
as part of the URL to access the router remotely.
Remote Admin
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the
Inbound Filter:
Delete icon to remove the rule. Details will display the current status of the rule.
D-Link DIR-868L User Manual

Tools

Admin
97