Pptp - D-Link DIR-868L User Manual

Section 3 - Coniguration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This
option is typically used for DSL services.
My Internet
Select PPTP (Username/Password) from the drop-down menu.
Connection:
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
PPTP IP Address:
Enter the IP address (Static PPTP only).
PPTP Subnet Mask: Enter the subnet mask provided by your ISP (Static PPTP only).
PPTP Gateway: Enter the gateway IP Address provided by your ISP.
PPTP Server IP:
Enter the server IP provided by your ISP (optional).
Username:
Enter your PPTP username.
Password: Enter your PPTP password and then retype the password in the next box.
Reconnect Mode: Select either Always, On-Demand, or Manual. You can also select a
schedule for connection.
Maximum Idle
Enter a maximum idle time during which the Internet connection is
Time:
maintained during inactivity. To disable this feature, enable Auto-reconnect.
Primary/Secondary The DNS primary and secondary DNS server information will be supplied by your ISP (Internet Service Provider.)
DNS Servers:
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your speciic ISP. 1400 is the default
MTU.
D-Link DIR-868L User Manual

PPTP

30