Wps Button - D-Link DIR-868L User Manual

Section 3 - Coniguration
Add Wireless This Wizard helps you add wireless devices to the wireless network.
Station:
The wizard will either display the wireless network settings to guide you through manual coniguration, prompt you to enter the
PIN for the device, or ask you to press the coniguration button on the device. If the device supports Wi-Fi Protected Setup and has a
coniguration button, you can add it to the network by pressing the coniguration button on the device and then the on the router
within 60 seconds. The status LED on the router will lash three times if the device has been successfully added to the network.
There are several ways to add a wireless device to your network. A "registrar" controls access to the wireless network. A registrar
only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the
device. The router acts as a registrar for the network, although other devices may act as a registrar as well.
Click to start the wizard and turn to page 41.
You can also simply press the WPS button on the side of the router, and then press the
WPS button on your wireless client within 120 seconds to automatically connect without
logging into the router.
Refer to page 115 for more information.
D-Link DIR-868L User Manual

WPS Button

WPS Button
92