Tools; Admin - D-Link DIR-645L User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Admin Password:
Enter a new password for the Administrator Login Name. The administrator
can make changes to the settings.
System Name:
Enter a name for your router.
Enable Graphical
Enables a challenge-response test to require users to type letters or numbers
Authentication:
from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router's network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. This means to
Server:
connect to the router, you must enter https://192.168.0.1 (for example)
instead of http://192.168.0.1.
Enable Remote
Remote management allows the DIR-645L to be configured from the Internet
Management:
by a web browser. A username/password is still required to access the Web
Management interface.
Remote Admin Port:
The port number used to access the DIR-645L is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-645L
and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the
URL to access the router remotely.
Remote Admin
This section will list any rules that are created. You may click the Edit icon to
Inbound Filter:
change the settings or enable/disable the rule, or click the Delete icon to
remove the rule. Details will display the current status.
D-Link DIR-645L User Manual

Tools

Admin

104