Changing The Factory Setting Of A Function Button; To Reset A Button To Its Factory Setting - Sony STR-DE585 Operating Instructions Manual

To reset a button to its factory
setting
Repeat the above procedure.
If the factory settings of the FUNCTION
buttons do not match your system components,
you can change them. For example, if you have
a tape deck and you do not have an MD deck,
you can assign the MD/TAPE button to your
tape deck.
To reset all the function buttons to
their factory setting
Press I/& AV I/6 and MASTER VOL - at
the same time.
Note that the settings of the TUNER button
cannot be changed.
1
Hold down the Function button whose
function you want to change (for
example, MD/TAPE).
2 Press the corresponding button of the
component you want to assign to the
Function button (for example, 4 - Tape
deck).
The following buttons are assigned to select
the functions:
To
operate
CD
player
DAT deck
Press
1
2
MD deck 3
Tape deck A
4
Tape deck B 5
LD player 6
VCR
(command mode
VTR 1 * 1 I
VCR (command mode
VTR 2*)
8
VCR (command mode
VTR 3*)
9
TV 0
DSS (Digital Satellite Receiver) >lO
DVD
ENTER
VCD player
IN4
* Sony VCRs are operated with
a VTR 1,2 or 3
setting. These correspond
to Beta, 8mm and
VHS respectively.
Now you can use the MD/TAPE button to
control the tape deck.
48GB