Automatic Tuning; Preset Tuning - Sony STR-DE585 Operating Instructions Manual

Hide thumbs Also See for STR-DE585:
Table of Contents

Advertisement

5 If you've tuned in an AM station, adjust
the direction
of the AM loop antenna for
optimum
reception.
6
Repeat steps 2 to 5 to receive another
station.
Tips
l
If you do not remember the precise frequency. pre\r
TUNING + or TUNING - after entering the value
close to the frequency you want. The receive1
automatically tunes in the station you want. If the
frequency seems to be higher- than the entered value.
press TUNING +, and if the frequency seems to be
lower than the entered value, press TUNING -.
l
If "STEREO" flashes in the display and the FM
stereo reception is poor, press FM MODE to change
to n~onauml (MONO). You will not be able to enjoy
the stereo effect, but the sound will be less distorted.
To return to stereo mode. press FM MODE again.
The tuning scale differs depending on the ara code
as 4~own yn the following table. For details on area
codes. see page 4.
Area code
FM
AM
U. CA
100 kH7
, 0 kHz:':
AU, SP. CEL, CEK. TW
50 kHz
9
kHz
E2lE3, MX
SO kHz
9 k&:::
.: The AM tuning scale can be changed (page 53).
Automatic tuning
If you don't know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
1 Press TUNER.
The last received station is tuned in.
2
Press FM** or AM** to select the FM or
AM band.
3 Press TUNING + or TUNING -.
Press TUNING + to scan from low to high;
press TUNING - to scan from high to low.
The receiver stops scanning whenever a
station is received.
When the receiver reaches either end of
the band
Scanning is repeated in the same direction.
4 To continue
scanning,
press TUNING +
or TUNING -again.
-::* For models of area code CEL, CEK: FM/AM.
Preset tuning
After you have tuned in stations using Direct
Tuning or Automatic Tuning, you can preset
them to the receiver. Then you can tune in any
of the stations directly by entering its 2-
character preset code using the supplied
remote. Up to 30 FM or AM stations can be
preset. The receiver will also scan all the
stations that you have preset.
Before tuning to preset stations, be sure to
preset them by performing steps on "Presetting
radio stations" (page 32).
continued
31G5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-de485eStr-de485

Table of Contents