Samsung SRN-6450 User Manual page 66

Date Format lets you choose either yy.mm.dd, mm.dd.yy, or dd.mm.yy for displaying the
current date. yy is year, mm is month, and dd is day. You can choose between 24-hour and 12-
hour time formats for displaying the current time in Time Format.
Click Time Zone to select your time zone and city. If your city observes Daylight Saving Time, it
will be applied automatically. You can also manually decide whether to use DST or not with
DST Use.
You can choose to use an NTP client and NTP server in the NTP menu. NTP (Network Time
Protocol) synchronizes the time among the various devices and systems connected to a
network; NTP client automatically communicates with registered NTP servers to adjust its time
setting. To use an NTP server other than the default one, change Public Server Address.
Changing the GMT settings automatically changes Current Time.
Synchronizing the time settings of the NTP server and the product may take a
Note
while if you change NTP client settings from Disable to Enable. Updating the
time settings of the product does not take effect immediately; you must refresh
the screen by opening the Time Setup page.
To use the NTP client option, the NTP public servers and the Monitor Ethernet
Port must be within the same network.
When the NTP Server option is activated, the Source Ethernet Port acts as the
NTP server.
New Current Time settings are applied only if you click
Configuration and NTP settings are applied only if you click
Note
64
. New Time
.