5.5. Formatting HDDs
On the main screen, press ∧ and ∨ to move to the screen shown below, and then press
Enter.
5. HDD Format
[SET]
The screen shown below appears where you can use ∧ and ∨ to select the HDD to format.
1. Internal HDD
2. External HDD
2. External HDD
3. All HDD
5.5.1. Formatting a Single Internal HDD
Under HDD Format, select 1. Internal HDD, and then press Enter.
1. Individual HDD
2. All Internal HDD
1. Select 1. Individual HDD, and then press Enter.
HDD Number to format
Internal HDD? [1]
Use the ^, v buttons to select the number for the HDD to format, then press ENTER.
Format HDD [1]?
Yes: Enter No: Esc
Upon pressing Enter, the following messages appear while the selected HDD is being
formatted. To move back to the previous phase, press ESC. To cancel formatting and move
back to the main screen, hold down ESC for 2 seconds or longer.
Formatting HDD
is in Progress...
HDD Format
[DONE]
91