Samsung SRN-6450 User Manual page 13

No. Name
10 EXTERNAL
HDD4
11 REC
12 ALARM
13 ERROR
14 RAID
15 LINK/ACT1
16 LINK/ACT2
17 LINK/ACT3
18 POWER
19 Config Ethernet
Port
20 LCD Panel
21 ESC Button
22 Direction Button
Enter Button
A blue indicator means that an external HDD is connected to the
rear eSATA Port4 and functioning normally. A red indicator means
that External HDD4 is not functioning properly.
A red indicator means that the product is in recording mode.
A blue indicator means that an event in Input Group has occurred.
A red indicator means that the product is not functioning properly.
A blue indicator means that the product is running in RAID mode.
A blinking blue indicator means that a network cable is properly
connected to the Monitor Ethernet Port, and data communication is
taking place properly.
A blinking blue indicator means that a network cable is properly
connected to the Source Ethernet Port, and data communication is
taking place properly.
A blinking blue indicator means that a network cable is properly
connected to the Storage Ethernet Port, and data communication is
taking place properly.
A red indicator means that the product is powered on.
Used to connect the product to a computer for the system
configuration.
The panel displays the current status of the product; it can also be
used to change the system configuration with the adjacent buttons.
This button is used to change the system configuration. 'Chapter 5
LCD Setup' covers its use in detail.
This button is used to change the system configuration. 'Chapter 5
LCD Setup' covers its use in detail.
11
Function