Bissell 1660 User Manual page 10

Getting ready
1. Remove dry filter bag from ball cage.
2. Place ball on raised area on bottom of tank unit.
3. Position ball cage over ball and press firmly onto
raised area.
4. Insert tank siphon tube in tank unit.
5. Attach bare floor tool to floor nozzle.
Cleaning
1. Turn on vacuum/suction switch.
Do not turn on pump/spray switch
or pump damage may occur.
2. Place Big Green in a dry area of
the floor.
3. Vacuum as usual.
4. If the machine loses suction and/or motor noise rises in
pitch, empty the tank [see WHEN YOU'RE DONE]. Failure
to empty tank will damage unit.
5. See WHEN YOU'RE DONE, page 7 and PUTTING IT AWAY,
page 11.
10
How to wet vacuum
Vacuum/suction switch
Look for BISSELL formulas to safely remove dirt, stains,
and odors leaving carpet and upholstery fresh and clean.
Fiber Cleansing
Formula
Tip:
Clean water
spills can be
picked up from
surfaces directly.
No cleaning
solution is
necessary.
Bare Floor
Allergen
Care
Control