Buick Regal 2011 Owner's Manual page 192

7-34 Infotainment System
Using the Digit Dial Command
b
1. Press .
For vehicles without a
navigation system, the
system responds Ready,
followed by a tone.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
Hands Free. The system
responds Ready, followed
by a tone.
2. Say Digit Dial. The system
responds Digit dial using
<phone name>, please say the
first digit to dial, followed by
a tone.
3. Say the digits to be dialed one at
a time. The system repeats back
the digit it heard followed by
a tone.
4. Continue entering digits until the
number to be dialed is complete.
After the entire number has been
entered, say Dial. The system
responds OK, Dialing and dials
the number.
If an unwanted number is
recognized by the system,
say Clear at any time to
clear the last number.
To hear all of the numbers
recognized by the system,
say Verify at any time.
Using the Call Command
b
1. Press .
For vehicles without a
navigation system, the
system responds Ready,
followed by a tone.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
Hands Free. The system
responds Ready, followed
by a tone.
2. Say Call. The system responds
Call using <phone name>.
Please say the name tag,
followed by a tone.